Part Number Hot Search : 
PQ3RD23 HD64F3 SB102 TM1637 PD150 MB8998X D1325 CM100
Product Description
Full Text Search
 

To Download SMAT-30P15 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 nv/sa Excellence in physical acoustics Sint-Niklaas - Belgium
SMAT-30 Multi-Application Transducer SMD & Pin version
Pagina 1 van 4
Both the SMA buzzers and the SMAT (Sonitron Multi-Application) transducers are specially developed to meet a wide range of requirements in sound pressure, mounting methods, connection possibilities and dimensions. The transducers do not have a built-in oscillator. The drive frequency must be generated with electronics outside the transducer. Recommended drive circuits are described in this catalogue. Our transducers produce a highly reliable audible tone signal, giving either an extremely clear and penetrating tone or a soft sound for non-aggressive signals. They are available in five sizes: 13mm, 17mm, 21mm, 24mm and 30mm.
ADVANTAGES & APPLICATIONS
ADVANTAGES: octagonal form models with different pin pitches light but solid construction not fixed working frequency easily mountable SMD models with heat resistant labels for protection during re-flow soldering, * packed in a tray for automatic placing * * * * * * * * * * * * * * * * APPLICATIONS: audible alarms gas detectors measuring and weighing equipment medical instrumentation timers instrumentation and control systems copiers automobiles games & toys cash registers, etc.
SPECIFICATIONS
Model Sound pressure * Frequency range dB(A) 300 - 5000 Hz Capacitance (+/-30%) 25 nF Operating voltage 0 to 30 VAC pp Weight 5g
SMAT 30 See graph page 2
* All measurements are made in free air at 21C at 30 cm at 10Vpp square wave. The test buzzer is soldered on a PCB board with dimensions 24 cm x 11 cm.
Operating temperature Storage temperature Life time (at 21C) Case material Standard colour of case
-40C to +85C -40C to +85C See expected life time curve in addendum ABS (UL rating: 94 HB) for pin-versions PPS (UL rating: 94 V0/5V) for SMD-versions Grey
nv/sa Excellence in physical acoustics Sint-Niklaas - Belgium
SMAT-30 Multi-Application Transducer SMD & Pin version
Pagina 2 van 4
ELECTRICAL PARAMETERS
Sound pressure vs. Frequency Precision of frequency: 15% Operating voltage: 10V (pp) (square wave)
All measurements are made at 30 cm in free air at 21C.
DIMENSIONS (All dimensions are in mm)
Pin-version SMD-version
nv/sa Excellence in physical acoustics Sint-Niklaas - Belgium
SMAT-30 Multi-Application Transducer SMD & Pin version
Pagina 3 van 4
DRIVE CIRCUITS
When the transducers are used in a drive circuit at one single frequency, the designer should bear in mind that the precision of the frequency, as mentioned on the graph "sound pressure vs. Frequency" is +/- 15%. We therefore recommend to test the sound pressure level with the transducer connected to the final drive circuit.
nv/sa Excellence in physical acoustics Sint-Niklaas - Belgium
SMAT-30 Multi-Application Transducer SMD & Pin version
Pagina 4 van 4
PRODUCT CODIFICATION SMA T

-
30
Transducer
P15 P17.5 P20.32 S P : Pin distance (in mm) S : SMD terminals
Sonitron MultiApplication
Square diameter (mm)
LIST OF AVAILABLE PRODUCT TYPES SMAT-30 P15 SMAT-30 P17.5 SMAT-30 P20.32 SMAT-30 S
A heat protection label in capton material is glued on the SMD model of the SMA buzzer. This enables the user to pick up the buzzer by vacuum. During the reflow soldering process the heat shield label remains on the buzzer and must be removed after soldering. These heat protection labels are standard for all SMD buzzers.
MODELS ON REQUEST
The SMA series can be delivered, upon special request, with the following protection : * Wash tabs A wash tab is glued on the sound emitting hole of the buzzer to protect it from water penetrating into the hole of the cavity. The PCB at the back is also sealed with a silicon film. To order this part, please add WASHTAB to the model number of the SMA series. Acryl coating For applications in aggressive humid conditions, models containing a membrane with a protective coating are available. The protective coating gives a complementary assurance against smog. Add MC to the model number of the SMA series.
*


▲Up To Search▲   

 
Price & Availability of SMAT-30P15

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X